CO Check + Carbon Monoxide Breath Monitor
Product Code: N101246
- Designed as a low-cost screening device for smoking cessation.
- Results instantly displayed on large display
- Single press button to toggle between ppm and %COHb
- Breath hold countdown timer to guide patients
- Measurement of environmental CO levels
The CO Check + carbon monoxide breath monitor has been specifically designed as a low-cost screening device for smoking cessation.
A single breath will instantly display results on the large screen in CO part per million (PPM) or % Carboxyhaemoglobin (%COHb) – the amount of carbon monoxide attached to your red blood cells represented as a percentage. Users are guided to hold their breath with a count down timer and then encouraged to exhale with an on-screen blow icon to assist testing compliance.
The CO Check + breath monitor is also capable of detecting environmental CO levels. When the Environmental Capture is enabled, background CO levels are taken into account when carrying out a breath test. This ensures that any possible environmental exposure can be clearly identified. Environmental levels are displayed in PPM.
- CO Check + Carbon Monoxide Breath Monitor
- Carry case
- 4 SafeBreath mouthpieces
- 9v PP3 battery
- Calibration stem connector
- Operating manual
Is the monitor CE Marked?
Is it IEC 60601 Electrical Safety Standard Compliant?
Is the useful life of the device 2 year or 5 years?
The device has a 5 year warranty except for the electrochemical fuel cell which has an expected life of two years and is therefore excluded from the warranty. The electrochemical fuel cell works in a similar way to a battery and therefore the more you use it the shorter it’s life. The chemical is used up as it combines with the CO in the exhaled breath, which produces a current that is proportional to the CO concentration. In normal use the cell will last at least 2 years but if it is used regularly with high levels of CO, or exposed to abnormally high levels of CO, it may need to be replaced sooner.
Gas Detected – Carbon Monoxide
Concentration Range – 0-99 PPM
Detection Sensor Used – Electrochemical fuel cell
Sensitivity – 0.1 PPM (0-10 PPM range); 1 PPM (10-99PPM range)
Accuracy (repeatability) – 2ppm or +/- 5% whichever is greater
Operating Temperature – 5-35o Celsius
Operation pressure – Atmospheric 10%
Operating Humidity – 30% to 90% RH
Operating Altitude – Sea level to 6000 ft
Storage Temperature – minus 20 to + 70O C
Storage Humidity – 10% to 90% RH
Hydrogen cross-sensitivity – <12% at 20˚ C
Sensor Life – 2 – 5 years, 2 years warranty
Sensor Drift – <2% per month
Display – Custom LCD
Power Supply – Single 9V PP3 battery
Weight Approximately – 150g including battery
Dimensions – 135mm x 65mm x 30mm
Results displayed – CO PPM (Carbon monoxide parts per million)
%COHb (% carboxyhaemoglobin)
%FCOHb (% foetal carboxyhaemoglobin)
CO Check + – Catalogue Number CO10